Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

Displaying 1 - 20 of 20

  1. Drawings count: 2

    Machining-Turning, Medium Volume

    This Qimtek member currently has a requirement for the attached parts to be turned from EN19T mild steel. They require quotes for 400 off of this part, which could develop into an ongoing requirement moving forward. There is an immediate order to place with the successful supplier, meaning that this project will be a great fit with those who have immediate capacity to fill.

  2. Drawings count: 1

    Machining-Turning, Medium Volume

    This new buyer to Qimtek specialises in scanning equipment for the filming industry and seeks a new supplier for the attached flanges. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above.

  3. Drawings count: 2

    Machining-Turning, Medium Volume

    This manufacturer of hydraulic equipment, who outsources approximately £500,000 worth of machining each year, is running low on stock of the attached damper screws and would like to hear from suppliers who are capable of their manufacture. There is an immediate order to place, which is expected to be repeated in line with stock requirements - generally once every 3 years.

  4. Drawings count: 1

    Machining-Turning, Medium Volume

    This manufacturer of hydraulic equipment, who currently outsources approximately £500,000 worth of machining every year, has redesigned a stock part and would like to hear from suppliers capable of the threading, chamfering, and zinc plating required. There is an immediate order to place for this enquiry which is repeated as required for stock - please be aware that this is likely to occur on an approximate yearly basis.

  5. Drawings count: 4

    Machining-Turning, Medium Volume

    This client, who spends £40,000 a year on subcontract machining, seeks a supplier for the production of the attached roller rings, spacers and end caps. These are to be manufactured from mild steel and require aspects of turning, drilling and chamfering in order to complete production. The buyer is looking to review their supplier base for these items and subsequently, are keen to establish contact with those who have the capacity for this type of work. Moving forward, this order will be repeated, making it an ideal opportunity to grow your long-term customer base.

  6. Drawings count: 1

    Machining-Turning, Medium Volume

    This client is looking for a new supplier to machine 100 off mild steel drive shafts. The ideal supplier will be able to produce these parts economically, offer reliable delivery and provide a high-quality end product. Once a relationship has been established, further projects could be made available in addition to this initial requirement. This design will be used as part of an industrial machinery project and the buyer has an order ready to place for its production.

  7. Drawings count: 2

    Machining-Turning, Medium Volume

    A new buyer to Qimtek - a distributor of power tools - seeks a supplier for the attached chuck adaptors which require turning, milling and threading. They are looking to collaborate with a Qimtek member that can offer a good value and high-quality end product. There is an order to place with the chosen supplier, with further orders to follow moving forward.

  8. Drawings count: 2

    Machining-Turning, Medium Volume

    Destined for use within the industrial machinery sector, these pipe break valves and valve seats are required by a manufacturer who spends around £150,000 a year on outsourced machining alone. Delivery is required as soon as possible and therefore, interested suppliers are asked to make contact with the client at their earliest convenience. With an immediate order to place which is to be repeated every year, this project is ideal for any machining supplier with capacity who is looking for a new long-term buyer.

  9. Drawings count: 1

    Machining-Turning, Medium Volume

    Quotes are urgently sought for the production of a mild steel striker arm. Due to an administrative error, this component is required as soon as possible and the client will favour responses from those who can facilitate a fast turnaround. This project involves elements of turning and drilling, with price and lead time indications required for 100 off. Those who have the capacity to assist are asked to make contact with the buyer at their earliest opportunity; in turn, the successful supplier can expect to receive orders of these parts twice a year.

  10. Drawings count: 3

    Machining-Turning, Medium Volume

    A specialist within the environmental equipment field, whose annual spend in the subcontract machining market exceeds £250,000, has a current requirement for the valve holder attached. This part is to be made from mild steel and is initially required in a batch of 100 off. The client would ideally like to work with a supplier who can produce this item economically and offer a quick turnaround. In turn, they may also look to extend additional projects to the successful vendor moving forward, to run alongside this ongoing requirement.

  11. Drawings count: 1

    Machining-Turning, Medium Volume

    Specialising in engineering & fabrication solutions, this company spends over £10,000 a year on bespoke machined parts. At present, they are looking to locate a supplier who can undertake repeat orders of an EN3A bearing axle for the mechanical engineering industry. This design will be required on a repeat basis, with delivery of the initial batch needed by the 4th September. Suppliers that can meet this deadline are asked to submit their quotation as soon as possible.

  12. Drawings count: 2

    Machining-Turning, Medium Volume

    Destined for end use within a robotics application, the attached clamp screw spacer is required in a batch of 80 off. This is a new design for which there is no current supplier in place, to be turned from mild steel in accordance with the drawing provided. The company behind this enquiry values prompt delivery and good value from potential suppliers, with the parts required by the 28th August. Owing to their £10,000 annual spend on bespoke machined components, additional work could be placed with the successful vendor once a relationship has been established.

  13. Drawings count: 4

    Machining-Turning, Medium Volume

    Turning of two different jig store pins is needed, on behalf of an engineering and fabrication specialist that does not have any in-house machining facilities. Spending £10,000 a year on bespoke machined components, they require quotes for quantities ranging from 80 to 260 off, for which there is an immediate order to place. Quality and good value are the main drivers for this project, which is for a mechanical/robotics application.

  14. Drawings count: 1

    Machining-Turning, Medium Volume

    Operating within the industrial machinery sector, this company has an immediate machining requirement for which they seek quotes. Please quote your best price and lead time indications for the attached slat bars.The buyer is looking to increase their supplier bases therefore: this requirement would make a good fit for suppliers that have immediate capacity, as well as those looking for an ongoing relationship .

  15. Drawings count: 3

    Machining-Turning, Medium Volume

    Quotes are currently sought for a set of turned components, by a company that purchases over £50,000 worth of machined parts annually. The client does not have the capacity to complete the work in-house and therefore, they seek the assistance of a third party who can manufacture these items complete to the drawings provided. This will be a monthly requirement, meaning that the successful supplier wins a long-term customer, as well as the work in question.

  16. Drawings count: 1

    Machining-Turning, Medium Volume

    Operating within the industrial machinery sector, this company has an immediate machining requirement for which they seek quotes. Price and lead time indications are sought for the attached set of turned components, with batch sizes ranging from 5 to 200 off. These items are to be machined from a combination of mild steel, aluminium, and alloy steel, before being delivered prior to the 25th May. This may make the requirement a good fit with suppliers that have immediate capacity to fill. In addition, other work may be made available as the client spends £100,000 a year on bespoke components.

  17. Drawings count: 1

    Machining-Turning, Medium Volume

    This manufacturer is currently in the process of reviewing their machining PSL. They are looking to hear from suppliers that are able to turn the attached pillar, which is destined for end use within the industrial machinery sector. This item is to be made from mild steel, with quotes requested for a batch of 100 off at this time. As it cannot be made by the client in-house, the successful supplier can expect to receive repeat orders of this part moving forward.

  18. Drawings count: 1

    Machining-Turning, Medium Volume

    A manufacturer of conveyor equipment, who currently spends over £15,000 a year on subcontract machining services, seeks a new supplier for the attached drive shaft. This is a new design that the client will order on a repeat basis and therefore, the successful vendor will win not only the job in question, but also a new long-term customer. Initially, the buyer requires quotes ranging from 50 to 100 off, with the possibility of diversification into additional projects moving forward.

  19. Drawings count: 1

    Machining-Turning, Medium Volume

    Quotes are currently required on 100 off of the attached leg - an item which is to be machined from bright mild steel. The buyer is looking to explore two different options regarding the finish. Delivery of the initial batch is sought by the 5th February, making this an ideal opportunity to fill immediate capacity. This project will also spell repeat work for the company that the client selects.

  20. Drawings count: 3

    Machining-Turning, Medium Volume

    A long-term supplier for the production of two new designs is needed, on behalf of a hydraulics manufacturer that outsources an impressive £500,000 every year in the machining realm. This clamping screw and metering valve are made of mild steel and will be ordered in accordance with the end user's requirements. Suppliers should quote their best price and lead time in order to be considered for the work, which could lead to additional opportunities once quality and reliability have been proven.