Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

Displaying 1 - 20 of 242

  1. Drawings count: 2

    Machining-Turning, Low Volume

    This client, a supplier of diesel and petrol engine systems, seeks a supplier to produce the attached adaptor plates. These are to be made from mild steel with the ideal supplier being able to provide the balancing and blackening on both parts. There is an immediate order to place for this part - similar items may also be made available to the successful supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  2. Drawings count: 1

    Machining-Turning, Low Volume

    This manufacturer of roll cages is looking for quotes on the attached turned parts. This turned component is part of a project which the buyer is currently obtaining quotes, for their client. The material will be EN3B (070M20) There is another turning project that has been published for this client: 63slx270476. The buyer has requested that these are quoted separately.

  3. Drawings count: 1

    Machining-Turning, Low Volume

    This roll cage manufacturer is currently seeking prices on the attached parts, in order to complete a quote for their client. The parts are to be made from Mild Steel EN3B.

  4. Drawings count: 1

    Machining-Turning, Low Volume

    Quotes for best lead time and price are requested for the manufacture of a steel shaft. The buyer has requested that suppliers detail in their quote whether balancing and delivery is included. As per the machining detail notes on the drawings: *Key-ways are to be on opposite side of the shaft *Minimal tooling marks acceptable *Grind all over *Balance to ISO 1940 G2.5, to 7000RPM with driven pulley, key and lock washer *Material to be removed only from stated face at balancing Although this is a one off job, this buyer outsources a variety of parts.

  5. Drawings count: 1

    Machining-Turning, Low Volume

    This buyer is currently seeking an additional supplier for their supply chain, and they are keen to have the attached part quoted, with standard lead times confirmed. Although there is no immediate order to place this is a great opportunity to be considered for additional and ongoing work from this company

  6. Drawings count: 1

    Machining-Turning, Low Volume

    This company is currently seeking quotes for the production of shafts for their electric motors. They are currently looking to have 8 samples made within the next few weeks. Once they are tested and approved, they will be ordered in larger quantities. Please quote best price and lead time on these 8 samples.

  7. Drawings count: 1

    Machining-Turning, Low Volume

    Quotes for the attached Fixed Tube are requested. The buyer is ideally looking at delivery to be 10 working days or as close as possible from the order date. This component is part of a prototype they are building for a client. Once the design has been approved, they are expecting a yearly consumption of 200 units per year.

  8. Drawings count: 6

    Machining-Turning, Low Volume

    This supplier of diesel and petrol engine systems, is currently looking for prices and lead times on the attached set of parts. Please indicate whether price includes balancing/chemical blacking/delivery etc.

  9. Drawings count: 2

    Machining-Turning, Low Volume

    This buyer is looking for urgent quotes on the attached component. There is an immediate order to place for this part, and there could be further potential of regular orders being required.

  10. Drawings count: 1

    Machining-Turning, Low Volume

    This buyer has an urgent order to place for the attached turned parts. They are ideally looking at delivery within 2 weeks of today (24th April). If you are in a position to help the buyer, please submit your quotes as soon as possible. Due to the urgency of this project it may be closed once a suitable supplier has been found.

  11. Drawings count: 2

    Machining-Turning, Low Volume

    This buyer is currently seeking a new supplier for the following consumable tooling items. Annual quantities are currently approx 100. They are normally purchased in batches of 10 or 15- however the buyer may be willing to increase the order quantities if a suitable price can be achieved.

  12. Drawings count: 1

    Machining-Turning, Low Volume

    This client currently seeks a supplier to turn the attached components. There is an order to place for these items and delivery is desired for 2-3 weeks after order placed. Please note that these parts are very similar however: 2 drawings list the description as: 63.5 M/S Bar x 10swg 2 drawings list the description as 63.5 M/S Bar x 14swg

  13. Drawings count: 1

    Machining-Turning, Low Volume

    This designer and manufacturer of tooling solutions seeks a supplier to produce the attached turned components which are destined for end use within the aerospace sector. These are to be produced from mild steel and P20 and require drilling and turning. This is currently a one-off requirement, but may be repeated in line with customer orders going forward. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  14. Drawings count: 1

    Machining-Turning, Low Volume

    This buyer, a vintage motorcycle club and restorer, currently seeks the assistance of a machining supplier with the capabilities to produce the attached "rear drum sprocket". This enquiry calls for milling, drilling and turning with the parts to be produced from EN8 mild steel.

  15. Drawings count: 4

    Machining-Turning, Low Volume

    This buyer, within the Oil & Gas industry, is seeking quotes and delivery for the machined components for a mandrel assembly. The buyer is ideally looking for delivery within the next 2-3 weeks. Parts are only to be manufactured- assembly will be completed in house.

  16. Drawings count: 1

    Machining-Turning, Low Volume

    This client, a supplier of diesel and petrol engine systems, seeks a new supplier to produce the attached mounting blocks. These are to be made from stainless steel and provided with a natural finish . There is an order to place for this one-off requirement, with the possibility of additional, similar work to follow.

  17. Drawings count: 2

    Machining-Turning, Low Volume

    This pump manufacturer's existing supplier for the required sockets has recently closed down and a new, ongoing supplier is sought to produce these parts going forward. With an immediate order to place, the buyer has indicated that although this is a low quantity, different sizes of the parts are required through the year, and batch orders are expected of each size between 1 and 3 times per year. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  18. Drawings count: 2

    Machining-Turning, Low Volume

    This client, a manufacturer and distributor of agricultural, construction and environmental equipment, currently seeks a supplier to produce the attached stainless steel component . There is an immediate order to place for this enquiry, with the possibility of ongoing work to follow. The successful supplier must be able to complete all processes in-house. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  19. Drawings count: 1

    Machining-Turning, Low Volume

    This Qimtek member has an immediate order to place for this design of aluminium foot peg, which requires turning, chamfering and knurling processes. Quotes are sought for 50 off at this time. An excellent quality end product and on-time delivery are both critical elements of this enquiry and once the order is complete, this could also lead to similar future work once a relationship is established. Because of the immediate order ready to place, should a suitable quote come in quickly, the work may be awarded early. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  20. Drawings count: 6

    Machining-Turning, Low Volume

    This automotive exhaust manufacturer is new to Qimtek and would like to receive quotations from prospective additional suppliers for the attached turned stainless steel component. There is an immediate order to place for this enquiry, with delivery sought at the chosen supplier's earliest convenience. This order is to be repeated approximately every 3-6 months going forward, although this is stock-dependent. The chosen supplier may also be asked to quote for additional, similar components once a relationship has been established. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

Pages