Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

Displaying 1 - 20 of 71

  1. Drawings count: 1

    Machining-Turning, Medium Volume

    The attached clamp spindles are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as good value and high quality end product.

  2. Drawings count: 1

    Machining-Turning, Medium Volume

    With a machining outsourcing spend of over £15,000 per year, this company is looking for quotes of 500 off spacers with a lead time of 2-3 weeks. Quality, pricing and reliable delivery are all important considerations within this enquiry and there is also an opportunity for ongoing work to be made available to the chosen supplier moving forward. Please note that the buyer has asked that any delivery charges are included within the pricing per part, rather than as a separate charge.

  3. Drawings count: 1

    Machining-Turning, Medium Volume

    This specialist lighting designer is currently in need of a machining supplier to assist with a new project they are undertaking. With an immediate order to place for the attached component and delivery required at the supplier's earliest convenience, this project will be ideally suited to those with immediate capacity to fill. This is a one-off requirement at this stage, although it may be repeated at a later time.

  4. Drawings count: 1

    Machining-Turning, Medium Volume

    This Qimtek member currently seeks a supplier to produce the attached rods from S275 mild steel. These rods should be saw cut to length and machined with 1 hemispherical end. The client currently lacks the in-house capabilities to produce these themselves and therefore, a supplier is eagerly sought for both the ongoing and immediate batch orders.

  5. Drawings count: 3

    Machining-Turning, Medium Volume

    The attached clamp bushes, hoist pins & extended pillars are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as good value, high quality end products. Annual quantities of each part will be required, making this project ideal for those with long-term capacity.

  6. Drawings count: 3

    Machining-Turning, High Volume

    The assistance of a machining supplier is sought, in order to produce a hexagon bolt in accordance with the drawing provided. These parts are to be made from aluminium alloy and will potentially pave the way to ongoing work from the company in question. There is an immediate order to place with the successful supplier.

  7. Drawings count: 4

    Machining-Turning, Medium Volume

    The attached foot nuts, washers & leveling screws are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as good value, high quality end products. Quantities of 60-100 off of each part will be required annually, making this project ideal for those with long-term capacity.

  8. Drawings count: 1

    Machining-Turning, Medium Volume

    This bespoke lighting manufacturer, who specialises in the production of ultraviolet lamps, is currently running low on stock of the attached brass components. As their previous supplier is no longer trading, Qimtek members who are capable of assisting with the manufacture of the attached brass caps are asked to make contact with the client to discuss. There is an immediate order to place for this enquiry, with scope for the work to repeat in line with stock requirements moving forward.

  9. Drawings count: 2

    Machining-Turning, High Volume

    This company has an annual spend of over £50,000 on outsourced machining work and has an urgent order to place for the attached DC controllers, which will be used within electronics equipment. Quotes are required for either mild steel or bronze material, with price breaks of between 288 and 1000 off to ensure best value. Reliable delivery is crucial for this enquiry and pricing is also important. Either material using any grade will be suitable for the end product's use and therefore, pricing will dictate which material the client proceeds with. This enquiry will lead to repeat orders, meaning it will be suitable for those with immediate capacity who are also looking for long-term work from a new buyer.

  10. Drawings count: 1

    Machining-Turning, High Volume

    A manufacturer of computer operation tracker balls, who spends £50,000 annually on outsourced machining, currently seeks a new supplier who can machine the attached stainless steel profiled shaft. Although this is a one-off requirement, the successful supplier may be able to offer assistance within several other projects which are to follow shortly.

  11. Drawings count: 2

    Machining-Turning, Medium Volume

    This supplier of bespoke lighting solutions, who currently outsources approximately £50,000 worth of machining each year, would like to hear from suppliers who can assist with the production of the attached aluminium light base. This is currently a one-off requirement, although it is a new part and may be repeated going forward. There is an immediate order to place, with delivery required at the supplier's earliest convenience.

  12. Drawings count: 3

    Fabrication-Tube Bending & Manipulation

    This manufacturer of contemporary light fittings is in need of a supplier who can assist with the fabrication, drilling, and tapping of the attached tube. With an immediate order to place for the prototype run - which is to be followed by a full volume order if successful - this part is expected to be repeated on a quarterly basis going forward, although the frequency may vary in accordance with stock requirements.

  13. Drawings count: 3

    Machining-Turning, High Volume

    This manufacturer of bespoke lighting, who outsources approximately £100,000 worth of machining per year, currently seeks the assistance of a supplier who can undertake the turning, chamfering and finishing required for production of the attached fibre-optic end caps. This forms part of a larger job for which the client is currently tendering, for which production is expected to commence in July, ready for August delivery.

  14. Drawings count: 4

    Machining-Turning, High Volume

    This buyer, a lighting manufacturer spending approximately £100,000 a year on outsourced machining, seeks assistance from a supplier who is able to produce the attached aluminium components. The project calls for which a mixture of turning, tapping and countersinking of a "heat sink" and "main body". Although this is a one-off requirement, the successful supplier will be invited to quote on similar work in the future once a partnership has been cultivated.These items are part of a larger project the client is currently tending for,therefore, suppliers able to offer a speedy response will be seen favorably.

  15. Drawings count: 2

    Machining-Turning, Medium Volume

    The attached tommy bars and clamp screws are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as good value, high quality end products.

  16. Drawings count: 1

    Machining-Turning, Medium Volume

    The attached clamp spindle is required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as good value, high quality end products. Quantities of 250 to 500 off will be required annually, making this project ideal for those with long-term capacity.

  17. Drawings count: 1

    Machining-Turning, Medium Volume

    The attached guy collar lugs are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as good value, high quality end products. Quantities of 250 to 500 off will be required annually, making this project ideal for those with long-term capacity.

  18. Drawings count: 3

    Machining-Turning, Low Volume

    The attached turning bases, socket bases & collars are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as good value, high quality end products.

  19. Drawings count: 1

    Machining-Turning, Medium Volume

    The attached leg pins are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as good value, high quality end products.

  20. Drawings count: 1

    Machining-CNC Machining, Low Volume

    The attached aluminium base plate is required by a manufacturer of voltage control equipment. This project incorporates aspects of turning, milling and drilling, with the client requiring an initial order of 25 off at this time. Their £20,000 spend in the subcontract machining market means that this could lead to additional work, once quality and reliability have been proven.

Pages