Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

Displaying 1 - 20 of 49

  1. Drawings count: 2

    Machining-Turning, Low Volume

    This client, a manufacturer of industrial machinery who spends £350k a year on outsourced machining, currently seeks a supplier for immediate production of the attached range of milled parts. There is an immediate order to place for the attached components, the client has advised that the chosen supplier will also be asked to quote on similar enquiries moving forward. Although this is currently a one off requirement, these components are to be repeated in line with their customer requirements; however, the frequency may vary and is not known at this stage.

  2. Drawings count: 18

    Machining-Turning, High Volume

    This client, a manufacturer of agricultural machinery who so spends £50,000 a year on outsourced machining services, seeks a supplier to produce the attached range of turned components. These items are to be made from various materials and require turning, drilling and a small amount of milling. There is an order ready to place for this enquiry, which will develop into an ongoing requirement for the successful supplier.

  3. Drawings count: 1

    Machining-Turning, Low Volume

    This buyer - who spends in excess of £100,000 a year on outsourced machining - is urgently looking for a supplier to turn the attached spacer destined for end use within the industrial machinery sector. This enquiry is of an urgent nature but could also pave the way for additional work from the company in question.

  4. Drawings count: 1

    Sheet Metal Forming-Spring Manufacturing

    This manufacturer of friction components, who outsources approximately £45,000 worth of fabrication projects each year, has a new part that they are in need of a supplier of, to be used within machinery gearboxes. There is an immediate requirement for a sample, which will soon be followed by an initial order - this is to be repeated to the tune of 2000 units per year.

  5. Drawings count: 1

    Machining-Turning, Medium Volume

    This company has an order to place for the attached turned bearing shafts, which will be used as part of roofing winches for the construction industry. These shafts are structural and so a cosmetic finish is not important. This project incorporates elements of turning and threading, with quotes required for 200 off. The ideal supplier will be able to produce these parts economically, offer reliable delivery and provide a high-quality end product - once a relationship has been established, further similar projects could be made available in addition to this one-off requirement.

  6. Drawings count: 1

    Machining-Turning, Medium Volume

    This client, a distributor of power tools and accessories, seeks a supplier for the attached M14 extension bars, which require turning, milling and threading. They are looking to collaborate with a Qimtek member that can offer good value, as well as a high quality end product. There is an order to place with the chosen supplier, with further orders to follow moving forward.

  7. Drawings count: 7

    Machining-Turning, High Volume

    With an outsourcing spend in excess of £200,000 each year, this company is looking for a supplier partnership to manufacture the attached steel head flanges in large volumes. Quotes are required for an annual volume of 35,000 off. Anticipated call-off volumes are approximately 3000 off per calendar month. The ideal supplier will be able to produce these flanges and have capacity for extra work in addition to this initial enquiry. Samples will be ordered initially and once they have been approved, the first order will be placed. Pricing, reliable delivery and quality are all important factors within this enquiry. This is a fantastic opportunity to work with a large client and form a long-term relationship.

  8. Drawings count: 5

    Full turnkey-Machining with Fabrication

    With a machining spend of over £70,000 per year, this company has an order to place for the attached carbon steel mechanisms. This project incorporates elements of turning, milling, assembly and welding, with quotes required for 50 off for each assembly. The ideal supplier will be able to offer reliable delivery and provide a high-quality end product. There will also be repeat orders of these parts going forward and once a relationship has been established, further projects could be made available in addition to this initial requirement.

  9. Drawings count: 1

    Machining-Turning, Low Volume

    This client, a company who spends in excess of £50,000 a year on outsourced machining, urgently seeks a supplier to produce the attached carbon steel components. This project includes aspects of turning, milling and drilling, with the material being supplied free-issue by the client. There is an immediate order to place for this enquiry with similar work to be made available to the successful candidate going forward.

  10. Drawings count: 2

    Machining-Turning, Low Volume

    This metal spinning manufacturer, who outsources approximately £250,000 worth of fabrication work a year, has been let down by an existing supplier and now has an urgent requirement for the turning and tapping of free-issued steel billets. Although this is a one-off requirement, this could lead to ongoing work of a similar nature for the chosen supplier, once quality and reliability have been proven. Qimtek members are asked to make contact with the buyer directly in order to be considered for this enquiry, which may be awarded early if the right supplier is found.

  11. Drawings count: 1

    Machining-Turning, Low Volume

    This manufacturer of safety products for the automotive sector seeks a supplier to produce the attached items from free-issue EN355+N steel. This project calls for the material to be turned to the correct OD and cut to length. Interested companies are asked to make contact at their earliest convenience, as the buyer has an immediate order to place for this work. There is potential for this to become an ongoing requirement, making it an opportunity to fill both short and long-term capacity

  12. Drawings count: 2

    Machining-Turning, Medium Volume

    Machining of carbon steel plate compactors is required, on behalf of a company that outsources over £100,000 worth of machining work every year. The most important aspects for this company are flexibility and reliability, in order to manufacture the attached mild steel lifting tubes with emphasis on a high-quality, durable end product. Ideally, they are keen to hear from suppliers who are situated within a 50 mile radius. There is an order to place with the chosen supplier, who can fulfil all of the above.

  13. Drawings count: 1

    Full turnkey-Machining with Fabrication

    This client is looking for a new supplier to manufacture these carbon steel collars for pipework, to be used within the rail industry. Please note that delivery is required in early April. Outsourcing over £200,000 worth of machining and fabrication work every year, they have an immediate order to place. This project incorporates elements of turning, tapping, drilling, welding and galvanising, with quotes required for 3 off. The ideal supplier will be able to produce these parts economically, as the pricing is very important for this overall project. Once a relationship has been established, further, similar projects could be made available in addition to this one-off requirement.

  14. Drawings count: 1

    Machining-Turning, Medium Volume

    Specialising in the manufacture of pressure vessels and storage tanks, this buyer - who spends £30,000 a year on bespoke machined components - is looking for a UK supplier who can assist with the ongoing manufacture of the attached guide stem in three different materials, with both turning and drilling processes required. The part in question is currently sourced from China and now the buyer is looking to improve the associated lead times.

  15. Drawings count: 1

    Machining-Turning, Low Volume

    This client is looking for a new supplier to turn the attached locking pins, plates and bushes. Free-issue material can be supplied if required, and the client invites quotes with and/or without the use of free-issue material. A high-quality result is sought, with a fast delivery also highly desirable.

  16. Drawings count: 1

    Machining-Machining, Large 1m Plus

    This client, a manufacturer of thermoforming equipment, seek assistance from a supplier who can machine the attached selection of components. A broad range of materials must be used including various grades of structural steel, carbon steel, aluminium, brass and bronze. This project involves a wide range of manufacturing processes including milling, drilling, turning and a small amount of fabrication. There is an immediate order to place, with delivery required early January 2019.

  17. Drawings count: 3

    Machining-Turning, Medium Volume

    Due to a lack of in-house capacity, this buyer seeks a machinist to manufacture a series of roller axles, link pins and wheel spacers, for end use within industrial machinery. There is an order to place and similar projects will be made available to the successful supplier.

  18. Drawings count: 1

    Machining-Turning, Low Volume

    Outsourcing machining work to the tune of £240,000 every year, this company is currently seeking a supplier who can manufacture the attached shaft end. The buyer has an order ready to place for its production and ideally would like an immediate turnaround for delivery on Thursday this week - this is due to an extremely short lead time given by their client. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven.

  19. Drawings count: 1

    Machining-Turning, Low Volume

    The attached shaft is required by a buyer that operates within the packaging machinery sector. The client has an annual spend on subcontract machining that exceeds £50,000 a year and has advised ongoing work will be made available following the success of this project. The buyer seeks good value and quality manufacture, offering suppliers a chance to build new business and fill capacity moving forward.

  20. Drawings count: 1

    Machining-Turning, Low Volume

    An agricultural equipment manufacturer seeks the assistance of a Qimtek member that can offer production of the attached steel bearing housing, as they are currently looking to allocate a supplier for this new design. They would like to place an order for this work immediately, making it perfect for those who have capacity to fill - this is because the part in question is required for the machinery build to progress to the next stage. With a £50,000 annual outsourcing spend within the machining realm, the client may also have additional orders to place for similar items at a later stage.

Pages