Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

3949 Projects

Displaying 81 - 100 of 3949

  1. Drawings count: 2

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    This Land Rover refurbishment company who currently outsource approximately £50,000 worth of fabrication a year, is looking for a supplier who can assist them with the cutting, pressing, and assembly of the attached bulkheads. They have manufactured some parts in-house to help expedite the production, but a supplier is sought to continue and complete the manufacture and assembly of these bulkheads. With an immediate order to place for 50 units, this order will be doubled for 2020.

  2. Drawings count: 1

    Machining-Turning, Low Volume

    Turning, chamfering and drilling of pins, roller guides and bosses is needed, in order to satisfy a requirement for the agriculture sector. The parts in question will be used within crop spraying equipment and the client has an immediate order to place for their production. A fast turnaround and good value will be seen favourably, with delivery needed by 12/04/19 at the latest. Required quantities range from 1 to 8 off across the set, to be manufactured from various grades of mild steel. Their current supplier is unable to produce these items to a satisfactory finish and struggles to maintain agreed lead times. As such, the successful supplier will secure both immediate and ongoing work following the initial order.

  3. Drawings count: 1

    Finishing-Anodising

    A manufacturer of beverage accessories is looking to establish contact with a supplier that offers anodising services. They require quotes for free-issue wine coolers to be initially anodised in gold, silver, and black. Going forward, they would also like various colours to be available. There is an immediate order to place which will then also be repeated going forward; as this will be customer driven, the frequency is not yet known, although it is estimated at a couple of times a year. Therefore, this an ideal opportunity to win a new long-term customer.

  4. Drawings count: 2

    Machining-Turning, Medium Volume

    Machining of carbon steel plate compactors is required, on behalf of a company that outsources over £100,000 worth of machining work every year. The most important aspects for this company are flexibility and reliability, in order to manufacture the attached mild steel lifting tubes with emphasis on a high-quality, durable end product. Ideally, they are keen to hear from suppliers who are situated within a 50 mile radius. There is an order to place with the chosen supplier, who can fulfil all of the above.

  5. Drawings count: 2

    Fabrication-Fabrication with Machining

    This buyer seeks a new supplier to assist with the manufacture of a fabricated enclosure and associated components. This company spends over £300,000 a year on subcontract engineering and seeks a supplier with the capabilities to undertake all aspects of manufacture. This project will involve elements of cutting, folding, turning and drilling, with the enclosures to be provided assembled including any finishing required. The client is looking to add two additional suppliers their current PSL, making this an excellent opportunity to forge a long-term relationship. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the pages to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  6. Drawings count: 4

    Machining-CNC Machining, Low Volume

    This client has an immediate order to place for the attached adaptors, plates and blocks which will be used together within an industrial machine. This project incorporates elements of turning and milling, with the components in question to be made from mild steel, copper and brass. Quotes are required for between 2 and 20 off of each part as shown in the batch sizes. The ideal supplier will be able to produce these parts economically, and offer reliable delivery of the first samples of 2 off each part and 4 off adaptors as quickly as possible, in order to be tested before full production takes place. During main production, regular orders of 10 off parts and 20 off adaptors will be placed on an ongoing basis. Once a relationship has been established, further projects could be made available in addition to this initial requirement.

  7. Drawings count: 6

    Machining-CNC Machining, Low Volume

    This company works in the industrial machinery sector and outsources over £300,000 worth of machining work every year. They have an immediate order to place for the attached adaptors, plates and jaws, which will be used together within a machine. This project incorporates elements of turning and milling and also requires some parts to be made from plastic and others from metal, with quotes required for between 2 and 20 off each part as shown in the batch sizes. The ideal supplier will be able to produce these parts economically and offer reliable delivery of the first samples of 2 off each part and 4 off adaptors as quickly as possible, in order to be tested before full production takes place. During main production, regular orders of 10 off parts and 20 off adaptors will be placed on an ongoing basis. Once a relationship has been established, further projects could be made available in addition to this initial requirement.

  8. Drawings count: 2

    Sheet Metal Forming-Enclosures

    This environmental studies and development company are in need of a fabrication supplier, who can assist with the manufacture and future development of the attached stainless steel enclosure. This is to be used within the electronics industry. There is an immediate order to place for this particular design, which will be updated throughout development. There is expected to be repeat orders for new designs on an estimated quarterly basis going forward.

  9. Drawings count: 4

    Plastic & Rubber-Rotational Moulding

    This buyer, a manufacturer of HVAC equipment, seeks a supplier to produce the attached rotational moulded cover-condenser. This part is currently produced overseas, although the client is eager to find a UK-based supplier to take over production moving forward. In addition to the part itself, the client seeks quotes for the applicable tooling required to produce this design on a repeat basis moving forward.

  10. Drawings count: 2

    Machining-Turning, High Volume

    This manufacturer of appliance controls is seeking a supplier who can assist with the machining of the attached nuts and bolts. The buyer behind this enquiry works within the appliance industry and has a sizeable outsourcing spend of £70,000 per annum on machining processes. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above.

  11. Drawings count: 1

    Fabrication-Tube Bending & Manipulation

    This Qimtek member currently has a requirement for the attached handle to be produced from mild steel tube. They require quotes for 50, 100 and 200 off of this part, which could develop into an ongoing requirement moving forward. There is an immediate order to place with the successful supplier, meaning that this project will be a great fit with those who have immediate capacity to fill.

  12. Drawings count: 17

    Machining-Turning, Low Volume

    This client, a manufacturer of safety products for the automotive sector, seeks a supplier to produce the attached turned components. Interested companies are asked to make contact at their earliest convenience, as the buyer has an immediate order to place for this work. There is potential for this to become an ongoing requirement, making it an opportunity to fill both short and long-term capacity

  13. Drawings count: 2

    Profiling-Laser cutting, tube

    This manufacturer of special purpose machinery is currently at capacity and have an order they cannot completely fulfil in-house. They would therefore like to hear from suppliers who can assist with production of the attached stainless steel box section, which is destined for use within industrial washing machines. Although this is a one-off requirement, the buyer is looking to increase their supply base, so there will be additional enquiries for the chosen supplier going forward.

  14. Drawings count: 4

    Machining-CNC Machining, Low Volume

    This manufacturing supplier is currently at 100% capacity and has their machinery running non-stop. They have an order which they require immediately and therefore, they require the assistance of a third party for production of the attached base plate and vacuum base. Although this is a one-off requirement, the client requires similar parts every 3 months, so this could lead to additional enquiries for the chosen supplier in future.

  15. Drawings count: 6

    Plastic & Rubber-Injection Moulding

    This university student, together with the the assistance of the university, has a project which is destined for use within under-developed countries with electricity supply issues. Suppliers are sought for both the initial and ongoing production of the attached plastic moulded parts, including a battery storage seat and a water storage seat. There is an immediate order to place, with delivery required at the supplier's earliest convenience. This is expected to be repeated every three months going forward, in hopefully increasing quantities.

  16. Drawings count: 1

    Fabrication-Tube Bending & Manipulation

    Suppliers with in-house tube bending capabilities are asked to quote for a selection of mild steel raising aid components. Destined for end use within the medical industry, the parts in question are to be quoted in batches of 200 off of each. The company behind this enquiry spends over £100,000 every year in the subcontract fabrication and machining realms, meaning that there is plenty of scope for the successful Qimtek member to develop the relationship further.

  17. Drawings count: 2

    Plastic & Rubber-Injection Moulding

    This manufacturer of children's bicycles currently has a gap in their production plan whilst awaiting capacity from their regular supplier. Therefore, they are in need of a temporary supplier to assist with the injection moulding of rubber inserts. Tooling will be required, although supplier input for the best method is welcomed. Although this is a temporary requirement with two runs expected, this may lead to future enquiries for the chosen supplier once a relationship has been established.

  18. Drawings count: 1

    Profiling-Laser Cutting

    3mm & 5mm thick mild steel cap plates are required, on behalf of a company that specialises in the manufacture of steel products for the retail industry. They would like to hear from companies that are able to offer these designs at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional, similar projects moving forward.

  19. Drawings count: 1

    Profiling-Laser Cutting

    15mm thick mild steel base plates require laser etching and countersinking, on behalf of a company that specialises in the manufacture of steel products for the retail industry. They would like to hear from companies that are able to offer this design at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional, similar projects moving forward.

  20. Drawings count: 5

    Fabrication-Light Fabrication (under a tonne)

    This oven cleaning company is looking to expand their business and introduce a range of "Oven Dip Tanks" to their portfolio .Therefore they would like to hear from suppliers who can assist with the manufacture of the attached fabricated and welded stainless steel parts. As the buyer is hoping to go to market by Summer 2019, there is an immediate order to place which will be ongoing on a monthly basis.

Pages