Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

3367 Projects

Displaying 161 - 180 of 3367

  1. Drawings count: 2

    Plastic & Rubber-Vacuum Forming

    Assistance with the production of a medical enclosure is required. Having had the prototypes cut from a flat polycarbonate sheet using a CNC router, shipped flatpacked and then assembled by a clinician without tools using snap fit joints, the client is now assessing whether vacuum forming would be a preferable method for full production. Quotes are therefore required for both methods at this time. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  2. Drawings count: 2

    Profiling-Laser Cutting

    This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut the attached flashing for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  3. Drawings count: 4

    Profiling-Laser Cutting

    This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut the attached flashings for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  4. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to cut and fold the attached landing plates and treads, for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably. Material: Mild steel durbar

  5. Drawings count: 1

    Profiling-Laser Cutting

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut the attached 1.5mm Galvanised parts, for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably.

  6. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This buyer is looking for quotes for approximately 15-20 large body castings, to be machined on an annual basis All Material is currently free issued, but this may possibly change in the future if the buyer can forge a solid relationship with a new supplier. These parts are required in a range of material i.e. Brass, Carbon Steel Stainless steel, Duplex. In the first instance, the buyer would like to obtain sample quotes and best lead times based on the attached drawings. Finished part number 122300, Material Carbon steel (ASTM A352 LCC). Made from free issue casting 122298/300 (weight 2.75 ton) This casting is a representation of the buyers midsize component range.

  7. Drawings count: 1

    Profiling-Laser Cutting

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut the attached 15mm Mild Steel 275JR parts, for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably.

  8. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    This buyer is looking for quotes and best lead time on the attached selection of stainless steel parts. Due to the urgency of these parts, this project may get closed as soon as a suitable supplier has been found.

  9. Drawings count: 2

    Fabrication-General Fabrication (over 1 tonne)

    This companies is involved in the design of aero engine test equipment. They are currently seeking quotes and best lead times on the attached fabricated Mild Steel assemblies.

  10. Drawings count: 1

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    This electronics company is looking for quotes, for the manufacture of sensor guards made from 1.5mm Zintec. Please include best lead time on delivery.

  11. Drawings count: 1

    Casting-Sand Casting

    This buyer is currently seeking prices and advice on getting the attached parts manufactured. The buyer has tried to find out if these are stock items but has been unsuccessful is sourcing them. Please can you quote any tooling costs separately. The material spec states Aluminium, however the buyer has been informed that casting this particular grade isn’t possible, and therefore an zinc alternative is required.

  12. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    This buyer is looking for a manufacturer who can supply a stainless steel gate to the attached drawing, complete. Ideally the buyer is looking for this to be supplied complete to the drawings, incl locks, glass etc. But if suppliers can only quote the manufacture of the gate, excluding these items, they can. They will need to list which items have been excluded from the quote.

  13. Drawings count: 2

    Profiling-Laser cutting, tube

    This Qimtek member is seeking best price and lead time on the attached two tube laser parts.

  14. Drawings count: 1

    Sheet Metal Forming-Heavy Sheet Metal (6mm+)

    Urgent request for quotes on the attached jig plates. these parts are for Covid -19 swab manufacture. The buyer is looking to place the order either today or early tomorrow. Please note that due to the urgency of this project, once a suitable supplier has been found the project will be closed. Material: Aluminium Cast Tool Plate or Equivalent Thickness of material ranges from 6mm to 10mm Please be aware this is also being sent to Laser Cutters.

  15. Drawings count: 1

    Full turnkey-Fabrication with Machining

    This design house is currently seeking quotes for the manufacture of the attached aluminium table legs. This projects will consists of aluminium table legs made up from press brakes, laser cut aluminium plate and laser cut tube. Parts are to be brazed here specified. Please note: Page 1 & 2 of the drawings are for reference, it is the parts on Page 3 that are required for quotation Please be aware that some of the parts are detailed below as 'sets'. These are the Table Legs and the Brackets. The quantities listed for these parts will be the sets required: 4 Table Legs = 1 Set 8 Brackets = 1 Set The other parts are listed in the quantities required. The buyer is happy receive part quotes, however please make clear which parts you are quoting when you make contact with the buyer. Ideally the supplier is looking at a supplier that is within a commutable distance.

  16. Drawings count: 9

    Fabrication-Light Fabrication (under a tonne)

    This buyer is seeking a single source supplier that can manufacture the brackets, planters and wire formed hive frame, detailed in the attached drawings. The buyer is keen to hear from suppliers who can provide economical prices and short lead times. This will lead to ongoing work for the successful supplier. This project will be sent out to complete manufacturers.

  17. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This company is currently looking for quotes and best lead times on the 2 attached parts. Each part is made up of 3 components which require manufacture and assembly. Item SN-B100-C00-A- Quantities to make up 7 -2 off SN-B100-001-A x 7 = 14 off -3 off SN-B100-002-A x 7 = 21 off -4 off SN-B100-003-A x 7 = 28 off Item SN-B100-D00-A- Quantities to make up 14 -2 off SN-B100-001-A x 14 = 28 off -3 off SN-B100-002-A x 14 = 42 off -2 off SN-B100-003-A x 14 = 28 off Material will be Galvanised Steel

  18. Drawings count: 1

    Profiling-Laser Cutting

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut the attached 8mm thick Steel S27 plates for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably. Please only quote for the plate outlined in red on the drawings, with the quantity listed below it.

  19. Drawings count: 1

    Machining-Turning, High Volume

    Quotes required for the turning of the attached nickel and gold plated pins, used within the electronics industry. Material: BRASS 36000 1/2 HT

  20. Drawings count: 1

    Plastic & Rubber-Plastic Fabrication

    This manufacturer of special purpose machines, is looking for a fast turnaround on the attached Polycarbonate outfeed and infeed tunnels. Quotes and best lead time are requested for these part and a quick response is extremely desirable.

Pages