Displaying 1 - 5 of 5
Drawings count: 2
This is an opportunity to join the PSL of a company that outsources £1million worth of fabrication work every year. As a steel fabricator for the construction industry, they are looking for an external vendor to press a new design of tread, ready for use within staircases. Quotes are sought for 1 off and 43 off of this part to be made from 8mm thick mild steel. In addition, similar components will be required moving forward, making this a chance to supplement your long-term customer base with a big-spending name. High quality is key for this project. There is an immediate order to place with the chosen supplier.
Drawings count: 5
Outsourcing approximately £30,000 worth of fabrication work each year, this manufacturer of hand tools and lifting equipment is currently looking for a supplier who can manage the folding process required on free-issue mild steel blanks. With an immediate order to place, this work is expected to be repeated between four to six times per year, making this ideal for suppliers looking to build a long-term relationship with a new buyer.
Drawings count: 1
Destined for end use within the rail industry, these forends are to be pressed from 2mm thick mild steel sheet metal. Quotes are required for 200 off per year, making it an ideal opportunity to fill long-term capacity. The tooling required to press these parts will be free-issued to the chosen supplier. The accuracy of the bend angles is critical, as these forends will be fitted to other parts and therefore high quality is essential. In addition, there may be scope for further work from the client moving forward.
Drawings count: 10
This buyer is looking for a supplier who can undertake the manufacture of a sizeable selection of curtainsider pillars, header profile & rear pillar profiles to be used within the truck & transportation industry. There is an order to place with ongoing work, in line with the annual quantities shown on the attached spreadsheet. This buyer spends in the region of £100,000 on this type of work per annum, meaning that the successful supplier may be invited to assist within additional projects in future.
Drawings count: 4
Press brake forming of free-issue laser cut blanks is needed, on behalf of a company that spends over £100,000 a year on bespoke fabricated components. These items are too large to be managed in-house, meaning that the buyer would like to allocate the work on a repeat basis to a company with the required capabilities. Owing to their annual fabrication spend of £100,000, there could be potential for the chosen supplier to diversify into additional projects once a relationship has been cultivated.