Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

20 Projects

Displaying 1 - 20 of 20

  1. Drawings count: 1

    Machining-Machining, Prototyping

    Spending approximately £100,000 annually on outsourced machining work, this manufacturer of hydraulic systems urgently requires the attached adaptor. This is to be used within the fastening system of one of their in-house machines, which may lead to additional enquiries in larger quantities for the chosen supplier going forward.

  2. Drawings count: 2

    Machining-Machining, Prototyping

    This manufacturer of bag packaging equipment, who outsources approximately £350,000 worth of machining each year, urgently seeks a supplier for the attached range of machined components. There is an immediate order to place for the initial quantity required for a presentation, this is expected to be repeated in increasing quantities moving forward.

  3. Drawings count: 8

    Machining-Machining, Prototyping

    This research and development company, who specialises in electronic motorcars and outsources approximately £150,000 worth of machining per year, is currently in need of suppliers who can assist with the immediate production of the attached range of pins and adaptors. With delivery ideally required by June 26th 2019, there is an immediate order to place for this enquiry, which is expected to be repeated in much larger quantities nearer the end of the year.

  4. Drawings count: 2

    Machining-Machining, Prototyping

    This lighting manufacturer, who outsources approximately £60,000 worth of machining every year, currently seeks quotations from possible suppliers who can help with the manufacture of the attached aluminium prototypes. Delivery is required as soon as possible and the buyer may award the enquiry as soon as the right supplier is found. Therefore, please make contact with the buyer at your earliest convenience if you can assist.

  5. Drawings count: 9

    Machining-Machining, Prototyping

    This manufacturer of motorcycles, who spends around £50,000 a year on outsourced machining, is currently looking for a possible long-term supplier of the attached aluminium components. This is the final prototype run of these parts which, if successful, will be ongoing work for the chosen supplier. The quantity and frequency is not known at this stage, but will become clear after the prototype has been tested and presented. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  6. Drawings count: 1

    Machining-Machining, Prototyping

    The attached set of components are to be machined from a variety of materials, on behalf of a jewellery manufacturer. They seek quotes for 1 off each component for initial prototype purposes, with the view to place production orders for 20 off each item, on an ongoing basis thereafter. They would like to build a relationship with a supplier who can provide high quality whilst retaining reasonable costs.

  7. Drawings count: 4

    Machining-Machining, Prototyping

    Destined for end use within an automated clothes iron, the attached set of parts are to be machined from a combination of mild steel and aluminium. The company behind this enquiry spends over £100,000 annually on subcontract machining services and seeks a supplier who can provide a fast turnaround on the production of this stopping mechanism, link support, coupling and base. These parts will be used for testing purposes and as the applicable deadlines are fast approaching, the client requests that interested suppliers submit their quotation as soon as possible.

  8. Drawings count: 2

    Machining-Machining, Prototyping

    With a £400,000 yearly spend on bespoke machined components, this company is a manufacturer of fire safety equipment. They currently seek quotes for the urgent production of a cam, which is to be made from either aluminium, mild steel or stainless steel in accordance with the attached drawings. The ideal supplier will be able to offer delivery of this component as soon as possible - in turn, similar work may be made available to them moving forward.

  9. Drawings count: 5

    Machining-Machining, Prototyping

    This domestic appliances manufacturer has an immediate order to place for prototypes of flanges, supports, shafts and rollers. The designs in question will be used within an automated clothing iron and it is essential that interested suppliers are able to offer a fast turnaround, as well as high quality components. Incorporating a number of different materials and processes, including milling and turning, this project will be ideal for flexible suppliers with immediate capacity. The client's £100,000 annual spend on machined parts means that additional opportunities could arise once a relationship has been cultivated.

  10. Drawings count: 3

    Machining-Machining, Prototyping

    Inserts, knuckles, blocks and bridges are required for use within an automated clothing iron. The client seeks a fast turnaround on production of the initial prototypes of these designs and therefore, this enquiry may be best suited to those with immediate capacity to fill. Quotes are required for batches ranging from 1 off to 45 off across the set, to be milled and turned from a combination of aluminium and stainless steel. The client is a domestic appliance manufacturer with a sizeable £100,000 spend on bespoke machined parts, meaning that additional opportunities may be made available to the selected vendor once a relationship has been cultivated.

  11. Drawings count: 2

    Machining-Machining, Prototyping

    3 off wine cooler bases are required for use as prototypes, which reflect a reworked design. The company behind this enquiry is a manufacturer for the food & beverage industry. They seek delivery of these items by the 3rd August and therefore, prompt responses from interested suppliers are requested. This is due to the commencement of full production within the following weeks, meaning that the reworked prototypes have to be tested prior to this stage of the project. Further prototyping requirements could also be extended to the chosen supplier at a later date, as the client outsources over £30,000 worth of machining work every year.

  12. Drawings count: 1

    Machining-Machining, Prototyping

    Destined for end use within an electronics application, the attached prototype disc and ring are to be machined from aluminium. The disc will be pressed into the ring by the buyer in-house, once the applicable electronic components have been fitted. The client seeks a high standard of quality, with consideration also paid to the price-sensitive nature of the project. This could become ongoing work for the chosen supplier once the project moves into the production phase.

  13. Drawings count: 3

    Machining-Machining, Prototyping

    Required as part of a larger robotics project, the attached spacer is to be machined from aluminium. It will angle a gripper within an arm and must be produced as per the attached drawing. Accuracy and precision are extremely important within this project, with delivery required as soon as possible.

  14. Drawings count: 1

    Machining-Machining, Prototyping

    Initial prototype sliders are sought for immediate manufacture, to be used within vivariums. The company behind this enquiry seeks quotes for 4 off pairs, as per the drawings attached. Interested suppliers must have the capacity available to offer delivery by early July; in turn, they may be invited to assist within additional projects at a later date.

  15. Drawings count: 2

    Machining-Machining, Prototyping

    With an annual spend exceeding £100,000, this manufacturer of domestic appliances would like to hear from machinists who can produce the attached aluminium and stainless steel components. Initial prototypes are required with some degree of urgency, with high-volume production runs to follow 2 - 3 months later.

  16. Drawings count: 4

    Machining-Machining, Prototyping

    Suppliers with immediate capacity are asked to provide a quotation for the two attached components, both of which are to be machined from aluminium. This enquiry is on behalf of a pump and valve designer that outsources over £40,000 worth of machining work every year. They are looking to allocate the work as soon as possible and therefore, interested parties are asked to make contact as soon as possible in order to be considered.

  17. Drawings count: 2

    Machining-Machining, Prototyping

    Outsourcing machining work to the tune of £30,000 a year, this company currently requires prototypes of a chamber and a top cap. These items are to be made from aluminium and black acetal respectively, with 1 off of each to be delivered by the latest of the 12th March. This is a one-off requirement preceding injection-moulded production runs, meaning that it will be best suited to those with immediate capacity to fill.

  18. Drawings count: 4

    Machining-Machining, Prototyping

    Prototypes for pre-production testing are required, on behalf of a company who subcontracts to the MOD and spends on average £70,000 per year on outsourced machining services. Productions runs will follow and are estimated in small batches, over a span of 20 - 25 years, perfect for those looking to gain a long term customer.

  19. Drawings count: 6

    Machining-Machining, Prototyping

    Machinists with the capabilities to finish machine free-issue castings are asked to make contact with the buyer - a sports car manufacturer that outsources an impressive £500,000 worth of machining each year - as soon as possible. The components in question are required urgently and therefore, the client is keen to identify third parties with both the capacity and capabilities to facilitate their ongoing manufacture. At this stage, they require quotes for 1 off of each part; in addition, there is scope to develop the relationship and for the successful supplier to lend their services to further machining projects.