Qimtek

Phoenix from the flames

06 Aug 2019

Engineering capacity news posted by Andy Sandford

A disastrous fire at P Patterns in Brierley Hill turned out to be the catalyst for a new and stronger company with some help from machine tool supplier DMG MORI.

P Patterns produces medium to large patterns for the foundry industry in iron, copper beryllium and model board.  The patterns are used for high volume parts, mainly in the rail, automotive and earthmoving industries for applications such as suspension parts and wheels which are ultimately delivered to major OEMs including Caterpillar and Scania. Although some of the patterns are for die casting, the majority are for sand casting in spheroidal graphite cast iron for highly stressed components.

In August 2018, Phil Hancox the Managing Director of P Patterns had a call to tell him his factory was on fire. Rushing to the scene, he saw his life’s work going up in smoke. Fortunately, nobody was hurt, but the building and the machinery were completely destroyed from a combination of water and fumes from the fire that ate into the metal of all his equipment.

Phil Hancox says, “We were well covered by insurance and we also had business interruption insurance which enabled us to keep all our employees on full pay while we set about rebuilding the company. We also owned the building next door, which was used for storage, so our first tasks were to reassure our customers and start putting the necessary power and services into the storage building so that we could get working again as soon as possible.”

Prior to the fire, P Patterns had a DMG MORI 635, which they had had for eight years and which had been running continuously without a breakdown. Additionally, the company had a number of other machines including a machining centre with 1.5m capacity. Phil Hancox adds, “The DMG MORI machine was very reliable, fast, accurate and produced a superior surface finish. Because we were so pleased with the machine, we decided to replace all our machining centres with DMG MORI equipment.  Although this would cost us more than like-for-like replacement we decided that this was an ideal time to make the extra investment which we judged to be definitely worthwhile for the long term future of our business.”

As soon as he had confirmation from his insurance company Phil Hancox explained the urgency of the situation to DMG MORI and placed orders on 17th September for a CMX800V and a DMC1450V. The CMX800V arrived on 18th November and the DMC1450V in December. The first machine was up and running just 9 weeks from order.

As well as the reliability of the machines and the quality of the finish, P Patterns saw other benefits with standardised tooling and fixturing across its machines, which has considerably reduced its tooling and fixturing inventory.

P Patterns Tel: 01384 79797

www.dmgmori.com

BACK TO ENGINEERING CAPACITY NEWS PAGE