Qimtek

  • New project

    Sheet Metal Forming-Stamping

    This company has an annual spend of over £1million on a large variety of outsourced fabrication work and is looking for quotes for these new designs of aluminium mounting tray, which will be used within the aerospace industry. Quotes are required for 600 and 800 off per year. Pricing and quality are of the utmost importance for this enquiry, which will lead to repeatable work.

    Posted:
    16 Oct 2019

    View project & drawing

  • New project

    Profiling-Laser cutting, tube

    This company is looking for quotes to manufacture this design of tube, made from stainless steel, which will be used within the construction industry. Quotes are required for 100 off per month and 1000 off per year. Pricing and a quality end product is of vital importance and quotes are required by 23rd October at the latest, in order to be able to forward these to the client for a decision to be made. This may also lead to similar work, in addition to this initial enquiry.

    Posted:
    16 Oct 2019

    View project & drawing

  • New project

    Machining-Turning, Low Volume

    Suppliers with the capacity to machine the attached ejector pin wax nozzles are sought, by a manufacturer of cast products that spends a sizeable £100,000 per annum on outsourced machining services. Quotes for 1 off & 10 off are required for end use within an automotive application. Pricing and a quality end product is of vital importance and quotes are required for the 23rd October. As well as future batches, the buyer may also request the services of the successful supplier within other projects, due to the abundance of similar work outsourced.

    Posted:
    16 Oct 2019

    View project & drawing

  • New project

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This company specialises in steel & glass balustrade systems and has an order to place for these two designs of framed panels, which will be used within the construction industry. Quotes are sought for 21 off and 14 off. Quality and pricing are both key elements of this enquiry. The buyer is keen to place an order, so should a suitable quote be received quickly, the work may be awarded early.

    Posted:
    16 Oct 2019

    View project & drawing

  • New project

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    With an impressive annual spend of over £1million on outsourced fabrication work, this company is looking for quotes for these new designs of aluminium cover, which will be used within the aerospace industry. Quotes are required for 600 and 800 off per year for each part. Pricing and quality are of the utmost importance for this enquiry, which will lead to repeatable work.

    Posted:
    16 Oct 2019

    View project & drawing

  • New project

    Profiling-Laser Cutting

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut the attached kick plates for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably.

    Posted:
    16 Oct 2019

    View project & drawing

  • New project

    Machining-Machining, Prototyping

    Spending approximately £100,000 annually on outsourced machining work, this manufacturer of hydraulic systems urgently requires the attached adaptor. This is to be used within the fastening system of one of their in-house machines, which may lead to additional enquiries in larger quantities for the chosen supplier going forward.

    Posted:
    16 Oct 2019

    View project & drawing

  • New project

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    This Qimtek member currently seeks a supplier who is able to produce the attached galvanised steel holders. The client currently lacks the in-house capacity to produce these themselves and therefore, a supplier is eagerly sought for their immediate production. In addition, this has the potential to become ongoing work for the chosen supplier moving forward.

    Posted:
    16 Oct 2019

    View project & drawing

  • New project

    Machining-Machining, Large 1m Plus

    This industrial bearing manufacturer is currently in urgent need of a supplier who can assist with the immediate turnaround of the attached mandrel. There is an immediate order to place for this enquiry, with delivery sought at the supplier's earliest convenience. Therefore, this one-off requirement will be best-suited to those with immediate capacity and could lead to additional work in future.

    Posted:
    16 Oct 2019

    View project & drawing